E1856EL
Specifications
Documentation
Overall drawings
Related products
|
Type |
Overall dimensions, mm, max |
Weight, kg, max. |
|
E1856EL |
24 х 111 х 116 |
0.3 |
|
Input signal |
0...5 mA, 4...20 mA, 0…20 mA, -5...0...5 mA 0...75 mV; -75...0...75 mV; 0...60 V; 0...100 V; 0...150 V; 0...250 V; 0...500 V |
|
Basic error limits |
±0,5% |
|
Temperature range (operating) |
-40 °С... +50 °С |
|
Protection extent |
IP50 |
|
Interface |
RS485 (Мodbus RTU) – main, for data transmission |
|
Data rate |
4800, 9600, 19200, 38400 bit/s. |
|
Parameters setting (reprogramming) through the interface |
– digital output; – interface RS485 (Modbus RTU) parameters; – analogue output signal parameters |
|
Analogue output |
Quantity: 0, 1 Ranges: 0...5 mA; 0...20 mA; 4…20 mA; 0...2.5...5 mA; 4…12…20 mA; 0…10…20 mA; -5…0…5 mA |
|
Digital output |
DC voltage: 300 V; 100 mA AC voltage: 200 V; 100 mA |
|
Maximum input signal overload |
150%, duration of 2 hours |
|
Time of setting output analogue signal, max |
0.5 s |
|
Installation |
DIN-rail of 35 mm |
|
Power supply |
220 VU – universal power: supply voltage of 85 to 253 VAC, 50 Hz or 120 to 265 VDC; 230 V – supply voltage of 85...253 VAC 50 Hz; 12 VN – (12+6/-3) VDC; 24 VN – (24+12/-6) VDC |
|
Power consumption from power circuit, max. |
6.0 V•А |
|
Power consumption by voltage circuits, max: by current circuits, max: |
0.5 W 0.01 W |
|
Calibration interval |
8 years |
|
Guarantee period |
2 years |
|
Mean life |
20 years |
|
Mean time between failures |
200000 hours |
Order form
E1856EL – а –b – с – d – f
a – input signal measurement ranges:
0...5 mA, 4...20 mA, 0...20 mA, -5...0...5 mA,
0...75 mV, -75...0...75 mV, 0...60 V, 0...100 V,
0...150 V, 0...250 V, 0...500 V
b – supply voltage:
220 VU – universal power: supply voltage of 85 to 253 VAC, 50 Hz or 120 to 265 VDC;
230 V – supply voltage of 85...253 VAC, 50 Hz;
12 VN – (12+6/-3) VDC;
24 VN – (24+12/-6) VDC
c – measurement range analogue output signal:
А = 0...5 mA; В = 4...20 mA;
С = 0...20 mA; АР = 0…2.5…5 mA; ВР = 4…12…20 mA;
СР = 0…10…20 mA; ЕР = -5…0…+5 mA; x – with the absence
d – digital output availability:
х – no output
01 – one digital output
f – custom design:
А – operation at NPP
(safety class – 4).
With the absence of custom design parameter is not specified.
Ordering example
E1856EL – 0…20mA – 220VU – СР – 01 TU 25-7504.226-2014
For the transducer with the following characteristics: transducer type E1856EL, measurement range input signal of 0...20 mA, supply voltage of 85...253 VAC, 50 Hz or 120...265 VDC, measurement range analogue output signal of 0…10…20 mA, digital output.
